|
Atmospheric entry is the movement of an object into and through the gases of a planet's atmosphere from outer space. There are two main types of atmospheric entry: uncontrolled entry, such as in the entry of astronomical objects, space debris or bolides; and controlled entry, such as the entry (or reentry) of technology capable of being navigated or following a predetermined course. Atmospheric drag and aerodynamic heating can cause atmospheric breakup capable of completely disintegrating smaller objects. These forces may cause objects with lower compressive strength to explode. For Earth, atmospheric entry occurs above the Kármán Line at an altitude of more than 100 km above the surface while at Venus atmospheric entry occurs at 250 km and at Mars atmospheric entry at about 80 km. Uncontrolled, objects accelerate through the atmosphere at extreme velocities under the influence of Earth's gravity. Most controlled objects enter at hypersonic speeds due to their suborbital (e.g., ICBM reentry vehicles), orbital (e.g., the Space Shuttle), or unbounded (e.g., meteors) trajectories. Various advanced technologies have been developed to enable atmospheric reentry and flight at extreme velocities. An alternative low velocity method of controlled atmospheric entry is buoyancy〔http://www.jpaerospace.com/atohandout.pdf〕 which is suitable for planetary entry where thick atmospheres, strong gravity or both factors complicate high-velocity hyperbolic entry, such as the atmospheres of Venus, Titan and the gas giants.〔http://arc.aiaa.org/doi/abs/10.2514/6.1965-1407〕 ==History== The concept of the ablative heat shield was described as early as 1920 by Robert Goddard: "In the case of meteors, which enter the atmosphere with speeds as high as 30 miles per second (48 km/s), the interior of the meteors remains cold, and the erosion is due, to a large extent, to chipping or cracking of the suddenly heated surface. For this reason, if the outer surface of the apparatus were to consist of layers of a very infusible hard substance with layers of a poor heat conductor between, the surface would not be eroded to any considerable extent, especially as the velocity of the apparatus would not be nearly so great as that of the average meteor." Practical development of reentry systems began as the range and reentry velocity of ballistic missiles increased. For early short-range missiles, like the V-2, stabilization and aerodynamic stress were important issues (many V-2s broke apart during reentry), but heating was not a serious problem. Medium-range missiles like the Soviet R-5, with a 1200 km range, required ceramic composite heat shielding on separable reentry vehicles (it was no longer possible for the entire rocket structure to survive reentry). The first ICBMs, with ranges of 8000 to 12,000 km, were only possible with the development of modern ablative heat shields and blunt-shaped vehicles. In the USA, this technology was pioneered by H. Julian Allen at Ames Research Center.〔Boris Chertok, "Rockets and People", NASA History Series, 2006〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「atmospheric entry」の詳細全文を読む スポンサード リンク
|